Test t3325:
Machine instructions INT INT1 INT3 INTO ICEBP SMI
- Tested procedures
-
IigINT
IigINT1
IigINT3
IigINTO
IigICEBP
IigSMI
- Source & expected listing
t3325.htm.lst
-
| |EUROASM LIST=ON, DUMP=ON, DUMPWIDTH=24, CPU=X64, UNDOC=ENABLE
| |t3325 PROGRAM FORMAT=BIN,LISTMAP=OFF,LISTGLOBALS=OFF
|[Mode16] |[Mode16] SEGMENT WIDTH=16,PURPOSE=CODE
|0000:CD00 | INT 0
|0002:CD01 | INT 1
|0004:CD02 | INT 2
|0006:CD03 | INT 3
|0008:CD04 | INT 4
|000A:CD05 | INT 5
|000C:CDFF | INT 255
|000E:F1 | INT1
|000F:CC | INT3
|0010:CE | INTO
|0011:F1 | ICEBP
|[Mode32] |[Mode32] SEGMENT WIDTH=32,PURPOSE=CODE
|00000000:CD00 | INT 0
|00000002:CD01 | INT 1
|00000004:CD02 | INT 2
|00000006:CD03 | INT 3
|00000008:CD04 | INT 4
|0000000A:CD05 | INT 5
|0000000C:CDFF | INT 255
|0000000E:F1 | INT1
|0000000F:F1 | ICEBP
| | EUROASM AMD=ENABLED
|00000010:F1 | SMI
|00000011:CC | INT3
|00000012:CE | INTO
|[Mode64] |[Mode64] SEGMENT WIDTH=64,PURPOSE=CODE
|00000000:CD00 | INT 0
|00000002:CD01 | INT 1
|00000004:CD02 | INT 2
|00000006:CD03 | INT 3
|00000008:CD04 | INT 4
|0000000A:CD05 | INT 5
|0000000C:CDFF | INT 255
|0000000E:F1 | INT1
|0000000F:CC | INT3
| |ENDPROGRAM t3325
- Expected messages
t3325.out
I0180 Assembling source file "t3325.htm".
I0270 Assembling source "t3325".
I0310 Assembling source pass 1.
I0330 Assembling source pass 2 - final.
I0470 Assembling program "t3325". "t3325.htm"{64}
I0510 Assembling program pass 1. "t3325.htm"{64}
I0530 Assembling program pass 2 - final. "t3325.htm"{64}
I0660 16bit TINY BIN file "t3325.bin" created, size=80. "t3325.htm"{101}
I0650 Program "t3325" assembled in 2 passes with errorlevel 0. "t3325.htm"{101}
I0750 Source "t3325" (119 lines) assembled in 2 passes with errorlevel 0.
I0860 Listing file "t3325.htm.lst" created, size=1465.
I0990 EuroAssembler terminated with errorlevel 0.
▲Back to the top▲